-
I've just discovered this project and absolutely love it.
In my use case, I have remotes around the house that let me adjust the brightness of my lights manually - I'd like to be able to do this, a…
-
Should slowly increase the brightness from 0% - 100% over a period of time (30-90 minutes). The time should end at the same time adaptive lighting begins adjusting Color temperature ("sunrise")
Ma…
-
I have most of my switches bound to the lights.
And the behaviour (with different brands) is not really good.
If I turn on and then off, the lights turns back on again after 2-3 seconds.
Moreov…
-
I use Adaptive Lighting integration with the screen brightness being lowered in the evening. When the screensaver goes on, the brightness goes to the screensaver brightness (255) which sets manual con…
-
If there is not geoclue-2.0 provider on the DBus session bus, hide the adaptive modes in display indicator.
-
A friend and I have the same issue..
sometimes we want to make it darker or brighter in the room that we are in and have it stay at the set brightness.. however we would like AL to keep adapting t…
-
### Required information for bug reports:
Please include the following information in your issue.
*Issues missing this information may not be addressed.*
1. **Debug logs** captured while…
-
If I set device brightness to the minimum and lock the device, once I login with fingerprint the brightness is higher, the brightness bar level seem still set at minimum.
Happens the same in every p…
-
If I got this right then color temperature curve used by this component looks like half sine wave (max. color temperature reacher only for a short period of time). Any change this could be controlled …
-
Request similar to #581 but with enhancements.
**Request:**
```
1. Light turned on with call for specific brightness: Option to adapt only temperature.
2. Light turned on with call for specifi…