-
Hey @niceboygithub,
thanks for your great contribution!
Unfortunately the alarm mode state of my m1s hub is not synced between Home Assistant and Homekit/Mi Home/Aqara Home.
When i change the ala…
-
2020版M1S网关在米家APP升级了最新版4.0.2_0006固件后,Aqara gateway插件只要一加载,M1S网关就会立即异常从所有地方离线(HA,米家app,homekit,ping命令测试断开),只能手动把M1S断电重启才能恢复。
1. 米家app在8月为M1S网关推出 最新版4.0.2_0006固件 。新老硬件架构的M1S网关均可升级。
2. 升级完成后,依然能按原来方式打开t…
-
### Does the issue really belong here?
- [X] I definitively want to report a bug within deCONZ or its REST-API
### Is there already an existing issue for this?
- [X] I have searched the existing is…
-
| Название | Значение |
|---|---|
| __Производитель__ | Lumi |
| __Модель__ | lumi.gateway.aqhm01 |
| __Прошивка__ | |
| __WEB Build__ | 1.2.19 |
| __API Build__ | 1.9.6 (9776) |
Детальная и…
-
hey @niceboygithub,
thanks for your great project! With your help i could enable telnet manually and flash the custom firmware to my hub.
Unfortunately i still cant connect my hub to home assist…
-
## Device
- Product name: Aqara Presence Sensor FP1
- Manufacturer: aqara
- Model identifier: lumi.motion.ac01
- Device type :
- Sensor
## Screenshots
![Aqara1](http…
-
Hi, after last update 0.0.11 - some warnings.
M1S in Mi Home mode firmware version 4.0.1_0012 :
Logger: custom_components.aqara_gateway.core.gateway
Source: custom_components/aqara_gateway/core/g…
-
This issue is to collect devices that use miot protocol for communication, which will help with future development efforts.
If you know about a device that is not listed here, please add a comment …
-
Hi guys! I hav e a problem with Aqara M1S gateway flashing. It connect a CP2102 board and gw. I use RX,TX cross, GND and 3,3V from board. I running aqaragateway.exe in virtualbox Windows 10 and i try …
-
### The problem
I am quite new here, I’m not very technical and most of my experience has been trying to get other systems to perform the type of automations Home Assistant can is an end-user, so I a…