-
Hello i have successfully connected my gateway to my local chirpstack and TTN,
i also can get my Rpi gateway to play ping pong with my end node (with mode 1).
now that I change to mode 11 to connect…
-
Hi, great board and nice code, would it be possible to support the Australian and New Zealand lorawan frequencies? I see that you are using the arduino-lmic code which has defined configs such as CFG_…
-
**Is your feature request related to a problem? Please describe.**
Currently, LMIC supports, [per README](https://github.com/mcci-catena/arduino-lmic#selecting-the-lorawan-version), LoRaWAN version…
-
So...I have a couple of older LoRa board (V2) and I am not able to get them to running. I have the Arduino IDE (2.2.1) set up, with the libraries installed for Heltec, and when I select the example sk…
-
Hello
I am quite new in Arduino and LoraWan, the Lmic library support only 915Mhz and 868Mhz, what about 433Mhz?
Thanks
eli
ELIVB updated
2 years ago
-
The MKRWAN library has some flaws regarding the timing and handling of the downlink message. Unfortunatly there is a lot of work to do to improve the library so here are some options:
Use a better …
-
It'd be great if the various support libraries (LoRaWAN) could be separated out from the ASR650x core; I'm wanting to use the CubeCell for Helium LongFi, which replaces the entire LoRa stack, though r…
-
Is it possible to use this core with Arduino-LMIC rather than the LoRaWAN library?
-
please find below an example which sends something to TTN. Power consumption is 19uA.
```
/*
* Example: Send battery voltage to TTN
* tested with HELTEC WiFi LoRa 32(V3):
* power consumpt…
-
I'm trying to build [this example](https://github.com/HelTecAutomation/ESP32_LoRaWAN/tree/master/examples/OTAA_OLED) using PlatformIO with the following config:
```ini
[env:heltec_wifi_lora_32_V2]…