-
https://github.com/SpenceKonde/megaTinyCore/blob/9aa8c03f910e068f78abe6e226478897e157adef/megaavr/cores/arduino/Arduino.h#L62
Looks like you were going to define these for the following devices?:
…
-
Since AVR-GCC 8, the new tiny are supported: https://gcc.gnu.org/gcc-8/changes.html
If I do a `find /usr/local/Cellar/avr-gcc -iname "*attiny817*"` I do get the following:
```
/usr/local/Cellar/av…
-
Surprisingly in the long list of supported Atmel chips, these chips not currently supported.
-
After the update was made to use BusIO, the interrupts stopped working for the new ATTINY series.
The interrupt pin will always be HIGH, regardless of if it's moving or standing still.
Version 1.…
-
Interrupts broke on the new attiny series (testing on attiny1604) when you started using BusIO. Using the following core: https://github.com/SpenceKonde/megaTinyCore
First off if you try to compil…
-
Hey,
I've been looking through the code to see if it is possible to run this code on an ATtiny (1614 for instance) and was curious if you had any input. I would love to run this code on an ATtiny w…
-
-
Hi,
I get an error when compiling Serial.begin(9600) for the ATtiny204.
When I switch chip to ATtiny404 it works fine. Results in 57% flash size. So I think Arduino Serial Library is to large to…
-
I'm able to burn a bootloader to an ATMEGA4809 (40 pin DIP) using jtag2updi, but when I try to upload a sketch I get the subject error:
```
avrdude: AVR Part "atmega4809{upload.workaround}" not foun…
-
A support of the MegaCoreX will helpful because there are other boards with MegaAvr0 chips,
(Curiosity Nano, ATmega4809 Xplained Pro ...) which are not supported by Arduino directly.
https://github.…