-
I have the following OSD: https://www.banggood.com/3DR-Micro-OSD-For-APM2_5-2_6-2_8-Pixhawk-PX4-Flight-Controller-Mini-Quadcopter-FPV-p-980860.html?rmmds=myorder&cur_warehouse=CN
minimosd-extra can…
ghost updated
6 years ago
-
I bought a 5V pressure sensor from [Banggood](https://banggood.app.link/jRLoWoLri4) that max on 30PSI. Read to late tough that I also should use a ADS1115 breakout. Is there something else I need, I c…
-
When I follow all of the steps in the picture then try to connect, it opens the port but doesn't connect. I have set my COM port to 8, but 4 did the same thing. My baud rate is set at 112500 and I'm l…
-
the new design of the tensioner (x andY) is 3mm, and bore of 624RS Bearing is 4mm
-
Hello.
Are there plans to support Camera using I2S on MicroPython?
There are some ESP32 module that supports OV2640 and OV7670 cameras, Built-in Flash lamp.
https://www.seeedstudio.com/ESP32-…
-
Hi,
I am thinking on porting this to the esp8266, I just have 2 questions:
1) How is the banggood wifi module works? (i.e. just emulates a local serial RX TX via tcp, etc)
2) Is it the SPI hac…
eried updated
2 years ago
-
Hi,
In BTLF, active TBS smart audio in UART and is ok with OSD ( piggy osd v2 )
In BUTTER, active TBS smart audio reset config UART when i save config and reboot.
ref of vtx : https://www.bang…
-
Please add support for "AQARA xiaomi mijia air detector portable"
Link : https://www.banggood.com/fr/Xiaomi-Mijia-Air-Quality-Tester-High-precision-Sensing-3_97-inch-Screen-Resolution-800480-USB-In…
-
#### Issue details
Pixhawk buzzer volume is too low to be heard when looking for lost model.
Products providing load beeping capabilities exist and can be classified as follows:
1. Simple two wire …
Saxin updated
4 years ago
-
```
If you could add support for SSD1289 displays then that would be HUGELY
appreciated. They're so inexpensive at the moment
(http://www.banggood.com/3_2-Inch-SSD1289-TFT-LCD-Display-Module-Touch-P…