-
Hi,
I am using the current version of basicstation - 2.0.6 to connect against AWS IoT Core for LoRaWAN using OTAA.
The incoming router_config message structure is of type:
{"msgtype":"router_c…
-
Hi I am very interested in this project.
I come from currently using the Mysensors library with the RFM95 Lora on 433MHz.
I would like to support this project and try out with testing as soon as p…
-
@kylejohnson has this been abandoned?
-
The following page indicates the status of work in rewriting and improving documentation
_Note: Pages that have the blue check mean that they are safe pages to perform the translation. For the tran…
-
Health status messages are mentioned in the online documentation Transmit Confirmation section:
"There is no feedback to the LNS if a frame could not be sent (e.g., because it was too late, there…
-
While running the basics.qml example on windows it gets hung up on requesting the protocol version while it works fine on linux. I'm not sure where to get started for fixing this.
-
I unable to get Chirpstack working in Basic Station mode for RU864 region, although it works for the KR920 region.
I used Dragino PG1302+Raspberry Pi3b gateway and three end nodes for RU864 region an…
-
**Describe the bug**
A clear and concise description of what the bug is.
Installed oculus then installed revive , games are smooth and work great, but the controllers do not register , I use a samsu…
-
It seems that when I compile I get this:
```
Arduino: 1.8.1 (Windows 10), Board: "WeMos D1 R2 & mini, 160 MHz, 921600, 4M (3M SPIFFS)"
C:\Users\User\Documents\Arduino\WIRELESS_UNIT_BDROOM\WIREL…
-
Hello,
I am trying to deploy the basicstation gateway on this [gateway](https://webshop.ideetron.nl/LARANK-8?Lng=en)
I am trying to get the TTS v3 setup on this gateway. The configuration of this ga…