-
### Description
TFT35 display no longer updates the hot end or bed temperatures from the printer until the print begins.
Machine: Creality Ender 3 Pro
Printer board: BTT SKR Mini E3 V2.0
…
-
https://www.amazon.com/BIGTREETECH-Printer-Filament-Detection-Detector/dp/B0C7PZDBNC/ref=mp_s_a_1_20?crid=14WDFLM5USXC1&keywords=bigtreetech%2Bskr%2Bmini%2Be3%2Bv3.0&qid=1693027249&sprefix=bigtree%2Ca…
-
### Description
the function POWER_LOSS_RECOVERY dont work with tft 35 v 2 via touch mode (rs232)
setup:
MB skr 1.4 with
firmware enabled function
POWER_LOSS_RECOVERY
HOST_ACTION_COMMAND…
-
BigTreeTech SKR board.stl is wrong the outer connector of the stepper driver is 2.4mm too far in.
The two big connectors are (heatbed and 24Vin) are 1.3mm to wide
TH1 TH0 TB are 1.3mm too far to the…
-
Hello,
how do I install and configure the PITFT43 DIP on the BIGTREETECH PI4B Adapter V1.0 and CB1 ?
-
Would be great to see this board supported. Github page: https://github.com/bigtreetech/BTT-Pi
-
My hardware;
Ender 3,
BigTreeTech SKR V1.3,
TMS2130 - BigTreeTech v3,
BigTreeTech SKR TFT35 V1.2
latest Marlin 2.0 bug fix (downloaded yesterday 2019-Sep-03).
Printer just halts around 1st …
-
**Is your feature request related to a problem? Please describe.**
Wiring Diagrams for BIGTREETECH-SKR-V1.3.
**Describe the solution you'd like**
A clear and concise description of what you want …
-
Hi i love your work and actaually working my way through the conversion as we speak. I notice that the board you support skr mini e3. But i have skr 3 board. Was wondrring if you can help me out?
-
Hi
according to
https://github.com/bigtreetech/SKR-3/blob/master/Hardware%20(SKR%203%20EZ)/BIGTREETECH%20SKR%203%20EZ%20V1.0-SCH.pdf
Endstop X, Y, Z, E0Det, E1Det have internal pullup resistor…