-
I have a "No Neutral" 2 gang touch light switch. The markings on the board say WIFI-W6B and i can see a ESP8285 on board.
I can't get this to flash using tuya convert. The switch seems to connect…
DJ-Q updated
3 months ago
-
Attempting to learn our TC2 Switch's ON/OFF Code via the official e-Control app for iOS returns a very long hex string for ON and OFF which is a great start however entering them into the config.json …
-
Hi.
First off I would like to state that I am new to Node-RED, git-hub, not very skilled at coding in general and my native language is not english.
A few days ago I decided to make a Node-RED flow …
-
The Fan Broke. Needs replacing. Now I need to decide how to smarten up it's replacement.
Should I just go regular Fan/Light with smart switches? or Smart Fan like #98?
-
I see so many people who want to add their device to their home assistant, and still people at the home assistant forums tell them they must flash their devices, for those of us who don't mind using t…
-
Hi,
This project seems really cool for an interesting smart home integration.
I started by downloading this version and upgrading it to Python 3, as I was unable to get a response to the SSDP req…
-
### Latest firmware used?
Latest firmware as suggested by https://github.com/arendst/Tasmota/wiki/Sonoff-RF-Bridge-433, which is https://github.com/arendst/Tasmota/blob/master/tools/fw_efm8bb1/RF-B…
-
Hi Hugen,
here I publish my mods to almost completely fix the loss of dynamic above 300MHz when the DUT is a LPF tuned below but closed to 300MHz such as VHF/UHF duplexers.
The mods on my prototype …
-
I don't have the CM15PRO however I've been using Mochad for a couple years now with a CM19A.
I managed to setup pimatic-mochad to talk to Mochad but the codes sent from pimatic-mochad don't seem to tr…
-
Hey there,
I just finished building my GBS- Control but no matter what I do - I can't connect to the initial wifi "gbscontrol" with the pass "qqqqqqqq".
I didn't change any code, left everything…