-
It should be possible to run both clock 1 and clock 2 at the same time if they are set to the same frequency. Why do this? So they can be run 90 degrees apart in phase to drive an I/Q demodulator. …
-
...or when switching input rates/toggling DC remove or when switch from narrow demodulator to WFM and back to narrow.
This bug occurs more often after e5e16ccff5e7b50f2f9c50b222819e198a867e5d.
I thi…
-
I have installed new tetra-plugin but when the new plugin is getting sync to frequency( 4 constellation points ) , sdrpp is getting closed automatically with following error:
`sdrpp: symbol lookup er…
-
Hello!
Thanks for you work in implementing this wonderful ADS-B demodulator.
I'm testing my own ADS-B modulator using your demodulator in loopback through gnuradio-companion.
On my laptop I obtain …
-
The GQRX 'M' and 'm' commands have been updated. The 'M' command now supports an optional 'bandwidth' argument (space delimited): M FM 15000\n (FM, 15Khz bandwidth). The 'm' command now returns the c…
-
There are a number of things I want which are not feasible to implement given the current way in which the GR flow graph is managed (in `shinysdr.i.top`, `shinysdr.i.receiver`, `shinysdr.devices`), su…
-
Having watched a few discs with AC3 audio now, it works really well, but lip sync is consistently out with the AC3 track - it needs to be delayed by about 190-200 ms to line up with the EFM and analog…
-
Capture updated priority channel code from lordmorgul fork master branch
I will work transferring the updated channel priority approach from my fork master branch. It has been tested for a couple we…
-
I would really appreciate if decoding of (non-encrypted) TETRA was added. I appreciate that it's much more complicated than most other features, and if this is out of scope feel free to close the issu…
-
Hi
This is a wonderful piece of software, but I am getting one error on Raspberry pi 3. I am getting from goesproc, when I run the command goesproc -c /usr/share/goestools/goesproc-goesr.conf -m pa…