-
### Board
ESP32-Cam
### Device Description
Burning ESP32 Cam module with Arduino on a breadboard
### Hardware Configuration
Arduino 5V - ESP32 5V
Arduino GND - ESP32 GND
### Version
v2.0.2
##…
-
Dave, this tool is already very useful. Do you think it's possible there's a way to use debug wire to change fuses? If so, after initially enabling debug wire, it would be possible to completely put a…
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
So I've seen there are discussions about implementing smoothing for Adalight devices. I've also seen the attempt to provide smoothing in Prismatik.
I have a setup with WS2812B LEDs and [use this pr…
TJ-91 updated
3 years ago
-
The ESP32 Core for Arduino 2.x is the most recent major version currently recommended for use with PlatformIO. The decision to discontinue support was made by the Espressif company, as indicated in th…
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
http://www.minecraftforge.net/forum/index.php/topic,32656.0.html
-
I've been working extensively on reverse engineering the IQ2020 firmware from a hex file found online, and have identified the RS485 address (0x1F) of their internet gateway and some of the functions.…
-
I figured I'd start a new comment to discuss the second gen sensorboard. My proposed hardware at this point is:
1) LPS22HH (replaces MS5611). I really don't know which is better, but the LPS22HH …
hpmax updated
3 months ago
-
I'd flashed the Turnigy Multistar 30A (http://hobbyking.com/hobbyking/store/__25365__Turnigy_Multistar_30_Amp_Multi_rotor_Brushless_ESC_2_4S.html) with kda.hex and it's getting very hot after a few se…