-
here the enclosure that has been split up into 3 parts for easier printing and has been repaired. when the enclosure was in one file it made it hard to print and was a lot more to get printed, but no…
-
Design PCB Shape and Enclosure for ESPCAM Modules to replace the RaspberryPi Cameras
Files to be found [here.](https://github.com/SJSURoboticsTeam/URC-Mechanical-2023/tree/main/ESPCAM)
https://g…
-
I'm about to mount mine in a enclosure, instead of reinventing the wheel can I get the cad file for the 12 filament inlet so I can modify it for the prusa original enclosure?
-
## Notes on the JLCPCB Enclosure Screws.
### For the PCB mounting holes.
Using drill bits as gauges I find that a 7/64 " - 0.109 drill enters the holes to near but not quite to full depth.
A number…
-
```
in few different flavors
```
Original issue reported on code.google.com by `bancika@gmail.com` on 29 Jan 2011 at 1:52
-
```
in few different flavors
```
Original issue reported on code.google.com by `bancika@gmail.com` on 29 Jan 2011 at 1:52
-
```
in few different flavors
```
Original issue reported on code.google.com by `bancika@gmail.com` on 29 Jan 2011 at 1:52
-
I tested image enclosure and i alway get error like this or url always containing `?#`
Sometime it's empty but show `//?#`
or image url: `http://www.website.com/img/image.jpg?#`
```
if ($enclosu…
-
For those of you who intend to print an enclosure for Ed's project you'll find my 2-color design on Thingiverse: https://www.thingiverse.com/thing:3346460
![772a3fad66ff7abf86f839f0a0dad7ef_preview…
-
This is the case we were planning on putting the Arduino in. Unfortunately, I will need the Arduino over break to work on software things. I can list here the size and dimensions of the Arduino with t…