-
Hi,
Every time when i upload the sketch, The COM-port gets disconnected and I get a popup stating the USB-Device isn't functioning like it should.
I hooked it up according to your explanation, but s…
-
Hi Mr Pham Cong Duc,
I used Arduino Pro Mini in its 3.3v, 8MHz which connected the HopeRF RFM 92W (Low-cost LoRa Iot Device: A step-by-step tutorial). But when i removed the power led and the board …
-
I have two other devices in the same room that are able to communicate while my LoRa Radio Bonnet on my Pi Zero cannot. The other devices can receive (FFFF0000345733E11203B22B47187E) what is sent but …
-
**Describe the bug**
I'm working with an Adafruit Feather M0 Lora (https://docs.zephyrproject.org/latest/boards/adafruit/feather_m0_lora/doc/index.html) with a GPS "featherwing" (https://www.adafruit…
-
Hi, we are trying to use 868 MHz MHz SX1276 ESP32 Lora to send message to gateway installed in a raspberrypi with Draguino. The gateway reconize the transeiver and work fine. The problem appears when …
-
I am interested in using this library for a LoRa antenna tracker and that would require running two radios at once on two different SPI ports. I have looked into it, and it seems there is a way to do…
-
**Describe your question or issue**
Hi,
I would like to know if the Pycom LoPy4 is easy supported with this library, or that we should develop some custom Hal Configuration for this board first.
…
-
Hi,
I was using the Arduino_Lora_Ping_Pong.ino to send sensor data.
So I read data from the DHT22 sensor and instead of sending the "Ping" string, I'm sending the data read by the sensor after conve…
-
**Describe the bug**
BatchSD does not publish with Dendrometer code with both LTE and Ethernet usage. Dendrometer uses dirty integrated sensor values added to the json using the add_data() function. …
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…