-
Usually fade timings are really accurate for me and do match well with the passed fade time in the command. But sometimes when issueing a fade command then the fade takes significantly longer to execu…
-
Hallo zusammen,
seit gestern ca. 14 Uhr bekomme ich den oben genannten Fehler. Habe den ring connector for FHEM fast 1 Monat ohne Probleme genutzt. Jetzt funktioniert es leider nicht mehr. Nächste …
-
Hello,
I wanted to update my Signalduino and have flashed the current hex file. After that, I can not longer receive or send correct signals. Has anything changed here?
I have flashed with the follo…
-
I’m trying to setup my eltako installation in node-red with your npm palette but it seems that there is no data communication.
I’ve seen your youtube clip and the data symbol is flashing regulary b…
-
Version: any version prior 1.12.2.13
Solution: Update firmware from FHEM homeserver (set tfmcu mcu-firmware-esp32 upgrade-beta-version) if connected to USB
-or- manually download version 1.12.…
-
When is the interface for FHEM planned?
I have integrated the SHPI one into FHEM via MQTT and can use it to read the sensors and control the relays, but a GUI is of course the main reason for the SHP…
-
Wenn ein Alarm ega, ob Motion oder Ring ausgelöst wird, dann steht hinterher in lastCaptureURL immer nur das vorletzte Video drin. Genauso verhält es sich mit den herunter geladenen Videos - man bekom…
-
Hello, where do I set the baud rate in the configurable Firmata 3.2 if I want to send it to Fhem via USB?
Arduino Mega 2560
-
Hi,
first, thank you for the great work - I am using your design since 6 Months, without any big issues (controlling 4 MHI SRK via mqtt from fhem)
I just recently noticed that all 4 modules ope…
-
Es wäre schön, wenn SignalDuino per MQTT kommunizieren würden, so wie [OpenMQTTGateway](https://github.com/1technophile/OpenMQTTGateway/issues/958). Dann wäre man nicht an FHEM gebunden.
Konkret mö…