-
### What happened?
Hi,
I have got a [Philips 9290012573A](https://www.zigbee2mqtt.io/devices/9290012573A.html#philips-9290012573a)
The current firmware version 1.19.0_r19755 with build date 2016120…
-
There is schematics, but I could not find firmware for thumb controller.
-
I'm experiencing a boot issue on RPI5 as follows:
1) When I try to boot it with uSD card having bootloader update firmware, it flashes 4 long, 5 short and red screen on display.
2) When the uSD …
-
Today I went to update my new printer to the latest firmware, when I attempted to download the latest version 4.4.24 I was greeted by my webbrowser blocking the download. I attempted to run it throu…
-
I see only a list of the sensors.
But there is no any firmware or construction drawings.
-
Just went through the procedure - **thanks for documenting it so well!**
Here are some additions and corrections that might help to make it even better:
* Add "Please install ESP32 boards core v…
-
please implement support for 11.02
-
Will I be able to install the new stock firmware "over top" of this or should I reset to factory before trying the new firmware?
-
Hello, very good scripts, just what i was looking for thank you!
Been testing on Debian 12 Edu and have firmware issues when i use eggs produce & eggs produce clone on a vm then try to live boot on…
-
Klipper doesn't seem to be pulling the z offset value from the config.mksini file. Nozzle digs deep into print bed every time. I have factory reset but so far, nothing is fixing it. Editing the printe…