-
**Quick Information:**
_OS:_ Windows 10 64 Bit
_EAW Version:_ v 1.120.748742
_FoC version:_ v 1.121.748742
_UFoCP version:_ v
_List any other mods used:_
_Were you playing on Steam?_ Yes
_Were…
-
At the moment in voltage mode, if information like phase_resistance, phase_inductance and KV_rating are provided, q and d currents are used as target and the q and d voltages are estimated.
The foc…
-
@delmalih
I'm training the focs model with google colab ,but it can't work when I follow the instructions.
Colab configuration are as follows:
torch.version.cuda-----
Cuda compilation tools, rele…
-
My board: `ESP32`
PlatformIO config:
```
[env:featheresp32]
platform = espressif32
board = featheresp32
framework = arduino
monitor_speed = 115200
lib_deps = askuric/Simple FOC@^2.2.2
lib_a…
-
http://localhost:4000/FOC.github.io/2022/03/25/blog-01/
介绍编译原理是计算机专业的一门重要专业课,旨在介绍编译程序构造的一般原理和基本方法。内容包括语言和文法、词法分析、语法分析、语法制导翻译、中间代码生成、存储管理、代码优化和目标代码生成。 编译原理是计算机专业设置的一门重要的专业课程。编译原理课程是计算机相关专业学生的必修课程和高等…
-
Import now works on gloomis69 files (from issue #206)
I have one that imports (CSA), but with issues I need to look at.
Two now progress past the 50% point ("Converting from Coding Rooms to Juic…
-
What about the https://www.infineon.com/cms/en/product/power/mosfet/n-channel/isg0613n04nm6hsc/ ? it got less resistance and lower gate capacitance. There are also other ones with a bit higher capacit…
-
I have a custom board (actually with an ESP32, but in the future I will use an STM32 MCU) which controls a motor with 0.1 Ohms of phase resistance approximately. I'm able to control the motor in **vol…
-
Hello,
I have hooked up a quadrature encoder to my BLDC motor in an attempt to get better startup torque and low speed control than with the default FOC sensorless mode. Unfortunately, I can't get…
-
Hi,
I use a VESC 6 edu for controlling robotic actuators and I would like to do the following:
-Use SIN/COS sensor on the rotor side for FOC control (which I have already done, it works well)
-Us…