-
When Glide = 0 and a new key is pressed and held, then turning up Glide changes the pitch of that note but no gliding effect sets in. Next notes are ok.
Also: Glide behaviour in poly mode seems a l…
-
If I press a two-hand chord and start moving one or more notes (on the left hand), some of the middle or higher notes (right hand) are repeated (two in a row) without running up and down the whole pat…
-
The "Spread on/off" toggle wouldn´t be needed anmore.
- Unison detune usually needs higher values for a nice thick sound
- Poly mode detune needs very low values for a subtle "slop" but still musi…
-
When I connect the MIDI-OUT of the external keyboard to the MIDI-IN of the P600 internally and start the external keyboard, make a MIDI connection via the MIDI interface and send the firmware SYX, an …
-
As of now, the P600 with gligli OS at transpose = 0 sends a midi note range from lowest to highest C as note 24 to 84 .
A simple MIDI keyboard with 5 octaves at transpose = 0 sends midi notes from lo…
-
-
At the moment the aad. patch parameters are distributed in a non-intuitive way on the number pad. With this enhancement the parameters belonging to a specific group should all be on single number, whi…
-
I found one unrelated bug only now which had been there at least since 2.1rc3:
- Sustain Pedal "on" is not being sent in "Unison Track" mode. Sustain Pedal "off" is being sent though. This is true fo…
-
Currently any MIDI patch SysEx ist written to the storage (of the number in the SysEx data). The proposed change is that Prophet 600 accepts MIDI storage only in a dedicated patch receive mode and tha…
-
[envelope_decay.xlsx](https://github.com/image-et-son/p600fw/files/7828571/envelope_decay.xlsx)