-
NEJE Master 2 products, after being re-flashed with Grbl 1.1f, are working with Lightburn.
But not possible to make it work with LaserWeb4 latest (for linux): " No supported firmware detected. Closi…
-
Hello! I am new to CNC programming and I am trying to build a core XY mechanism using grbl firmware.. I am using uno CNC shield and I uploaded grbl firmware version 0.9. I am using universal g code se…
-
Hello. I made this code work. But it's been twice that I have a mistake. It loses the connection due to one error or another. And when it loses the connection the laser stays on. Which pierced my 12mm…
-
I am using nucelo-f401re, want to install grbl firmware in it. how can I modify these resources to do so.
-
Portlister should check if there is already an open connection, if yes, it should not autoconnect.
Note: It's the same printer, so no real problem, however it may cause confusion in the logs.
```2…
Kunsi updated
7 years ago
-
Hi,
I just want to share with grbl community my work, it's a DXF to GCODE converter focused on laser engraving and built mainly to drive grbl-based machines.
It features some useful functionalities …
-
Hello,
I'm encountering an issue with GRBL where homing commands within G-code aren't functioning as expected after movement commands. Specifically, I'm trying to initiate a homing cycle at specifi…
-
I am trying to configure the CTRL+X (0x18: Soft-Reset) command on my screen using the firmware for laser
Tell me how to set up an additional button for sending a command CTRL + X ?
My screen MKS TFT…
-
Hello ,
I recently buy an MKS DLC V2.0 on aliexpress :
https://fr.aliexpress.com/item/HORS-LIGNE-GRBL-CNC-DIY-starter-kit-MKS-DLC-MKS-TFT24-tactile-cran-CNC-laser-machine/32913813397.html?spm=a2g0s.…
-
As we continue to add support for gcode senders and generally interfacing with the firmware without a GUI frontend, it is becoming apparent that the position reports 5x per second are really annoying.…