-
Good day Thank for a very nice integration. I need to get the heater status (on or off) from the integration. I don't currently see it as a property. Any plans or idea on how I can get it?
Thanks
-
# Problem
There seems to be a bug when creating a link between nodes with different temperatures. The heat exchange produces a disproportionate amount causing the temperatures to visibly diverge to…
-
Currently we are suggesting using dowels and other cylinders as jigs for bending the copper in the Temperature Control Unit's heat exchanger. It would be nice if we had a jig that:
- Makes bending ea…
-
We need a thermal simulation that can handle different materials for heat simulations. We can assume density of these materials are uniform.
- [ ] Heat source (from a resistor or burning fuel, for …
-
One issue with the Rdkr that I'm having is that the heat exchanger (rotor) gets stopped when the outdoor temperature gets close to the set inlet temperature. This is all fine on cold days, but on hot…
-
### Description
Compilation of heat exchanger models using a specific fluid cell model fails. The error seems to be a frontend error (see screenshot). The fluid cell model itself (not instantiated in…
-
If I interpret the code for the Large Heat Exchanger correctly the Threshold reduction for Superheated Steam is not proportional to the circuit config.
Instead it's proportional to the circuit config…
-
### Description
Hi,
When I try to use the heat exchanger model in Modelica.Fluid.Examples.HeatExchanger.BaseClasses.BasicHX, I get the following error
```
Simulation process failed. Exited with…
-
This issue is to add a new component model to represent sensible and latent air-to-air heat exchangers which are commonly used for the exhaust or relief air heat recovery.
The EnergyPlus component He…
-
If you don't know how it goes together it can be a nightmare to debug when using the wrench to rotate it. Perhaps the texture should have a dark patch on one side so that you can check to make sure ev…