-
After working well for a few months, this week the module stopped successfully updating. On reviewing logs, it seems to be having trouble parsing the response from the NOAA API:
```
0|MagicMirror …
-
In order to have better thermodynamic fits, it would be good to use only a linear fit of the relative humidity and temperature in the sub cloud layer between 500 and 1200 m
An example plot is show…
-
Hi; I've noticed on the device setup page (http://brewpiless.local/setup.htm) that I cannot setup a DHT22 as a Room Humidity Sensor in the first instance. The device stays when I hit "apply", but the …
-
"ids": {
"modelId": "TS0601",
"manufacturerName": "_TZE200_a8sdabtg"
},
"endpoints": {
"endpointDescriptors": [
{
"endpointId": 1,
"applicationProfile…
-
The procedure doesn't specify the temperature the tests were performed at. At a minimum this should be recorded. Multiple temperature treatments would increase confidence in the enclosure and membrane…
-
Hi Hubert Jan
What is possible when i add the Including temperature/humidity sensor to the orcon wificontroller?
Do i need it or is also to use with a apart humidity sensor in the bathroom?
Bes…
-
I have three sensors from Hildebrand, which are shown in the IHD. Can we get them as entities in the integration?
-
This AC Air Condition use nethome application default and has sensors for indoor temperature,outdoor temperature and humidity sensor.All this sensors work in aplication.I used this integration in home…
-
The rear of rack APC Temperature and Humidity Sensor has a faulty humidity sensor. It should be replaced.
Part Number: APC AP9335TH
-
DR - I was speaking with an engineer and we got to talking about humidity control for DOAS. He pointed out that DOAS are often controlled to provide dehumidified air to zones when the zone cooling so…