-
Hey, I LOVE the separator and wanted to build one too. I found that for me the transparent tubes are hard to find and they are quite expensive. Since I had success with using transparent materials for…
-
# Are you using KubeVela
First of all, thanks sincerely for constantly using and supporting KubeVela. We will try our best to keep KubeVela better, and keep community and eco-system growing.
## …
-
I have encountered a problem, I use the latest marlin firmware and 5160 is OK on my motherboard. The configuration is not changed, only the drive is changed to 5161, and the information displayed usin…
-
Research the different technologies for generating/storing power, including new technologies and systems that are likely to be used on commercial space vehicles. Consider the possible high requirement…
-
### Description
The problem with setting acceleration values globally with respect to RPM is that stepper motors to not work this way. As RPM increases stepper motor torque decreases exponentially.…
-
Automation Rising 2020 SOAR Hackathon
PROJECT: SHIPROCKET-A3E6A & ROBOCOP MESSENGER
AUTOMATION
Automation is the creation and application of technologies to produce and deliver goods an…
-
Hello,
I am attempting to convert my 5axismaker machine (5axismaker.co.uk/5xm-overview) to run on LinuxCNC as it currently runs on Mach4 with a Pokeys57U control board. The vendors couldn't assist w…
-
I am having an issue with my laser not firing at the correct spot relative to the actual job location. This in turns makes for some very jagged lines.
The problem presents itself as extremely obvi…
-
Hello,
I'm using the TinyG hardware with my 40W co2 laser cutter (made in china :-) ).
For toggling the Laser I tried to use the "M3" and "M5" and for PWM the "S" commands.
It looks like:
M5
G0 Xxxx…
-
Hi acredsfan,
Having been working on a prototype autonomous robotic lawnmower myself, I thought that I might offer some observations and advice based on what I have learned working on my prototype.
…
TCIII updated
6 months ago