-
Consider allow adding another polling object in the loop so that multiple transports can be supported simultaneously. For instance, as per https://www.st.com/resource/en/application_note/cd00264342-us…
-
### Configuration
Operating System: MacOS 14.3.1 (although also seen on windows and linux)
Device: Microbit v2.21 (nrf52833)
Device DETAILS.TXT
```
# DAPLink Firmware - see https://daplink.io
Bu…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Firmware revision 0x07, module in normal mode.
When writing "1" to register 0x40 on address 0x1E (to trigger UUID readout) the module restarts into bootloader mode.
Valid I2C transactions confirme…
-
My PiJuice is no longer at i2c-address 0x14 but reports at i2c-address 0x41
I guess this occurred after updating pijuice firmware from V1.5 to V1.6 (not sure however).
I was preparing a new system w…
-
Hi,
Thanks for the great work here. I have a Bebop2 and I accidentally deleted some files on the /lib/ folder. After that Bebop2 fails to boot with the following error
Bebop2 fails to boot up with…
-
When I compile my firmware (fork of avr keyscanner: https://github.com/Dygmalab/avr-keyscanner/tree/arm-flasher) the interrupt table is longer:
> 00000156 :
so the rjmp hardcoded here https://gi…
-
I think I have tried almost everything and also had a look at related issues:
* https://github.com/PiSupply/PiJuice/issues/647
* https://github.com/PiSupply/PiJuice/issues/610
* https://github.co…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
My goal here is to use edge impulse FOMO and get the count of objects on Wio Terminal. In order to do that, I was following this [link ](https://docs.edgeimpulse.com/docs/development-platforms/of…