-
I am looking for a way to install it for Mac.
dwadi updated
3 months ago
-
Dear JKS,
It seems that it is impossible to blacklist an IPv6 or even an IPv6 range. the Kiwi network interface does not recognize the format for example (Linode in IPV6), the IPV6 address or subne…
F4FPR updated
10 months ago
-
Having some trouble getting kiwiclientd.py to play to any sound devices. No sound output at all. Errors shown below. This is on a Mac Mini with the latest master. I can connect/record with kiwirecord…
-
Hi,
My KiWi is being fully utilised this evening and I can't easily log in to test something.
Rather than dropping exiting users by restarting the SDR, would it be possible to give priority to users…
G8JNJ updated
7 years ago
-
I find that when zoomed out and tuning by clicking on the waterfall, I very often don't tune to the correct frequency.
Would it be possible to change the resolution of the tuning step that the SDR sn…
G8JNJ updated
8 years ago
-
There are other time signals that are not supported by SDRAngel:
RBU (Russia), 66.67 kHz, strong in some parts of Europe
RWM (Russia), several shortwave frequencies (not sure if this provides th…
-
Would it be possible to add the ability to save frequencies (and modulation, bandwidth) like with bookmarks or something like other SDR software can do?
-
This is an enhancement / extension idea, not a bug.
I've setup a small dashboard for our remote QTH: https://dashboard.superlogical.ch/dashboard/db/technikraum-dashboard?orgId=1&from=now-24h&to=no…
-
Hello Edouard, I found out that with SDR Angel in the current version I cannot establish two connections to my local kiwisdr. However, due to the limited bandwidth of the kiwisdr in SDR Angel, this wo…
-
Thanks for recently adding the rev A1 design files, especially the schematic.
Are you guys sure about using Schottky ORing diodes (D81,82) for input multiplexing between the USB-C and cape power-in…