-
When I execute the following command,
> $ sudo sh -c "echo 'bone_eqep0' > /sys/devices/platform/bone_capemgr/slots"
_/sys/devices/platform/ocp/48300000.epwmss/48300180.eqep/_ is appeared.
But there …
-
Should also include 4.14-ti/4.19-ti backports.
-
```
[ 2903.917746] WARNING: CPU: 0 PID: 4695 at /opt/kernel-builder_repos/Re4son/re4son-raspberrypi-linux/all/fs/sysfs/group.c:255 sysfs_remove_group+0x98/0xa4
[ 2903.917753] sysfs group 'byte_queue…
-
### Description
Device name: WALTON
Processor: Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz 2.11 GHz
Installed RAM: 8.00 GB (7.79 GB usable)
System type: 64-bit operating system, x64-based processo…
-
Hello elrariel,
today I got my raspi W and immediatly prepared a sd-card with latest Dietpi.
I had some trouble following your "installation" hints, but I got it so far.
I installed everything in /…
-
I used balenaEtcher to flash the image found in the release and I'm getting a glitch screen.
![Peek 2021-04-12 12-12](https://user-images.githubusercontent.com/108437/114378922-7f633e00-9b88-11e…
-
[[PageOutline]]
= USB On-The-Go (OTG) =
Certain devices have USB Device Controllers or Dual-Role controllers that can be used in either host mode or device mode.
This page aims to document how …
-
Starting with a 64bit Pi OS Lite on a Raspberry Pi Zero 2 W, with [uvc-gadget 0.4.0](https://gitlab.freedesktop.org/camera/uvc-gadget/-/tags/v0.4.0) using a Camera Module v3 over v4l2 ... in this issu…
-
### Creating a feature request
It would be nice to have the ability to use a NanoHat OLED Display for NanoPi Neo/Neo2/Air. Also I think that these boards aree used a lot so other people would probabl…
-
### Description
My Bliss 15.8.6 is causing heavy battery drain and heating on my XPS 15 (9510). I wonder if it's because of the Nvidia GPU. I've also used the `module_blacklist=nvidia,nouveau` kern…