-
**Describe the bug**
Using the 16001 Heli mixer on 1.9, the FMU outputs to MAIN5 (the tail rotor) before arming. The output will start at 1110 uS, and then after a few seconds to about 1750 uS and st…
-
I use LSM6DSOX and LIS3MDL components, nrf52 board and I have achieved reading raw data seperately.
What I haven't been able to make work are the functions **lsm6dsox_sh_fifo_lis2mdl** or **lsm6ds…
-
### CircuitPython version
```python
CP9.1.1
Boot_out.txt:
Adafruit CircuitPython 9.1.1 on 2024-07-22; Adafruit Feather RP2040 Prop-Maker with rp2040
Board ID:adafruit_feather_rp2040_prop_maker
UI…
-
* [Notecarrier A](https://dev.blues.io/datasheets/notecarrier-datasheet/notecarrier-a/?__hstc=171785791.eadf97c81eb9bcdbcacb51dfc8ad2d53.1702288061669.1707737432097.1708416999180.7&__hssc=171785791.2.…
-
**Describe the bug**
I always have inconsistent magnetometers, despite many calibration dances
Looking at the parameter settings there are no calibration settings for the external mag
![image](https:…
-
As discussed in #6420, several sensors reuse the same bits and drivers that get them working could be optimized taking this fact into account.
Raise a dedicated topic to keep the discussion going o…
-
## Describe the bug
We're using a build server that uses the official docker containers to build the firmware and does a clean pull every time a build is started. Lately, we've noticed unpredictable …
-
Hi @ajshank,
I've been unable to build (with ./waf) the computer_ctrl version of Ardupilot ([maintained here](https://github.com/ajshank/ArduPilot)) for SITL. It also doesn't seem to build for oth…
-
All flight stack related applications, support libraries, and irrelevant testing, post-processing, and example scripts need to be removed. This issue can only be closed after we have successfully buil…
-
Hi.
I was wondering if you had made any comparison on these 3 chips, especially in terms of the magnetometer, which has been a big problem for me on the Invensense in terms of error.