-
Hi @vaibhavad,
I’m currently working with an 8xA100 80G setup and attempting to replicate the supervised training process for the Mistral-7B-Instruct-v2 model as described. However, despite followin…
-
Hardware: Arduino MKR1310
Firmware: 1.1.9
Library: LoRa.h 0.7.2 from https://github.com/sandeepmistry/arduino-LoRa
##Abstract
MKR1310 scrambles data instead of transmitting it unaltered.
### …
ghost updated
3 years ago
-
Hi,
I'm working on ADR in a ABP example project. When setting the ADR to 1, The device starts sending at SF12. It won't change SF even though the RSSI is around +10 dB. This is my code, any thoughs…
-
### Description of defect
Inability to enter sleep mode (or at least reach expected sleep mode average current) after calling
`static LoRaWANInterface lorawan(radio);` when working with NRF52…
-
After a JoinRequest and JoinAccept I transmit "hello world". I see that via an rtl sdr that the message has actually been send; however I don't see the uplink message frame in my Helium-IoT Console. N…
-
I compared [tinygo-org/tinygo/README.md](https://github.com/tinygo-org/tinygo/blob/3e109fca5f289f5e97548f061d7e0e24c9727193/README.md) with tinygo.org.
I suggest the following two things to be done…
-
I have wio-terminal with the E5 Lorawan module. The device does not boot after I drag the E5 .u2f over to the wio-terminal drive.
The RFM version will boot, but obviously lorawan won't work because…
-
| Feature/Platform | STM32WL | GNSE | LoRaWAN Class A Example |
|------------------|--------------------|--------------------------------|----------------------…
-
网络环境没有问题，参考官方文档微调报错**无法获取数据集latex-ocr-print** ，参考文档地址：https://github.com/modelscope/ms-swift/blob/main/docs/source/Multi-Modal/qwen2-vl%E6%9C%80%E4%BD%B3%E5%AE%9E%E8%B7%B5.md
遇到报错的微调启动命令：
```bash…
-
### Description of defect
I need to send a break signal on serial wire. Due to thre private declaration of SerialBase on BufferedSerial the method send_break() is not usable on BufferedSerial. …