-
### Feature Checklist
- [x] Searched the [issues page](https://github.com/e2nIEE/pandapower/issues) for similar reports
- [x] Read the relevant sections of the [documentation](https://pandapower.rea…
-
In #1, @aldalahmeh implements a new way to compute branch power flow estimates.
From what I understand, the original code that computes the flows straightforwardly from the voltages using ...
```
…
-
Hello,
I am using the Pandapower software to perform an OPF on the IEEE 14 bus network (case14). I have been able to develop a hourly load model for a year (1 - 8760 hours) which I have converted t…
-
-
Further improvements of the powerflow solver were identified in #238. We should reconsidered what we eventually store in `sol_P` and `sol_Q`, as described in more detail in the respective TODO comment…
-
Hello,
I got the following error when solving OPF for 2 test cases: case89_pegase__api and case240_pserc__api with the MATPOWER function runopf. It seems that there is a problem when generator boun…
-
Dear all,
I run an OPF and pass the solved case over to a PF solver. Then, the PF solver iterates. This should not be happening (I have established that after a discussion with Zimmerman), since the …
-
According to the PSSe manual `NOMV2 is present for information purposes only; it is not used in any of the calculations for modeling the transformer. NOMV2 = 0.0 by default.`
When CW = 3 this cause…
-
In the PSSE reader switch shunt `b` values should be converted to p.u. to be consistent with fixed shunts.
-
Hi all,
I've been gaining experience with MOST for a year and a half.
Now, I'm trying to run a 1 year simulation, for transmission planning purposes.
The network is made of 180 buses, 229 branch…