-
when reading a sontex heat outlet with command line tools I found a strange behaviour:
- mbus-serial-request-data returns 18 records with only entries with unit 'Volume' - makes no sense to me
- m…
-
### Related area
UART
### Hardware specification
UART
### Is your feature request related to a problem?
Yes. I have a problem. I don't know when the TX buffer is empty when i put data in it.
I d…
-
I have followed the config guidance and tried this
```
[[MBUS]]
Type = EmonHubMBUSInterfacer
[[[init_settings]]]
device = /dev/ttyAMA0
baud = 2400
[[[runtimesettings…
-
I designed an h313 board,I can use the sd card boot uboot and linux ,in linux i tested emmc driver it is ok 。it can work steadily for hs200,but when i use emmc boot,spl boot but uart print :
mmc_loa…
-
### Type of request
Question
### OS version
RutOs7.xx
### wmbusmeters version
1.17.1
### Your message goes here
Hello folks,
first of all thanks to all outhors for the great software! I compil…
-
I have the p1 dongle pro attached to an ESMR 5 meter (NL) and the gas delivered reports NA, and the water usage reports the gas usage. (I'm pretty new to HA and ESPhome) but as far as I can gather I c…
-
- Raspberry PI Zero W
- M-Bus Master HAT DS (micro)
When following instructions and running command:
```
docker run --name mbus \
-d -p 8080:8080 \
-e RUST_LOG=INFO \
…
-
It appears to currently not work to read out data from an E450 that is AES encrypted, using an IR RX/TX head. While the meter is initialized and it appears valid frames are received, no data is read f…
-
### Type of request
Enhancement
### OS version
Debian Bookworm
### wmbusmeters version
1.16.1 @ commit b3771a9b8e5ee72217a01370956d8923f54f4e78
### Your message goes here
wmbusmeters created o…
-
The following Q-walk_by telegrame can not be decoded.
https://wmbusmeters.org/analyze/4944934490130127350837ab780dff5f3500820200007e0007b06effcd6cff09000000ff2c510000001e3608000096070009000c000c000…