-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
Related to #1973, we're leaning towards using MCUBOOT, but we need to explore if this is viable before we settle on it. The most important thing we need to know is can we change the ota slot addresses…
-
Background: I had an MCU (efm8bb2) fail on a 4-in-1 due to a crash. In an effort to repair this ESC, I pulled another efm8bb2 from a donor ESC and replaced the failed one. These are different model ES…
-
```
Sanguino currently supports the ATmega644P and '644PA. It is straightforward
to add support for the ATmega644 and ATmega644A.
Part I: Update boards.txt with the following new definition for …
-
```
Sanguino currently supports the ATmega644P and '644PA. It is straightforward
to add support for the ATmega644 and ATmega644A.
Part I: Update boards.txt with the following new definition for …
-
Now I have a board based on STM32H750 MCUs.
It has a 64 Mbit external flash.
So now I confused how I can build a firmware for it,it only have 128 kb ROM.
I can't write a bootloader to jump to app b…
-
Good afternoon
Found your message: https://www.eevblog.com/forum/microcontrollers/rd60xx-mcu-controlled-power-units/
How is the work going open source bootloader that can support factory firmware
I…
-
uno.bootloader.file=arduino:optiboot/optiboot_atmega328.hex
does not work
```
uno.name=Arduino Uno HID-Bridge
#uno.vid.0=0x2341
#uno.pid.0=0x0043
#uno.vid.1=0x2341
#uno.pid.1=0x0001
uno.upload.too…
-
Hi, I am trying to use your debugger in a simple code using a custom board with and Atmega1284p, but I am not able to get it to work. I tried getting the optiboot bootloader and changing the Make file…
-
When i upload klipper FW, then can not communicate klipper with MCU.
Maybe bootloader pro…
ghost updated
4 years ago