-
To interact with [FlashForth](https://flashforth.com/) running in a `serial-term`, I've modified `forth-interaction-send-raw-result` as below. Basic things work nicely, such as sourcing regions via `…
-
Hello,
For a hobby project , I need to access the JTAG data by communicating the JTAG server to program a MAX10 FPGA, could you please suggest some solutions/hint to do it.
Thankyou.
-
If skills "VS Code" and "Visual Studio Code" are both used in the list of skills, we get nodes for each, even though VS Code is a [Wikipedia Redirect Page](https://en.wikipedia.org/wiki/Wikipedia:Redi…
-
From personal experience (as a learner and teacher) I know that graphical programming is much easier for children than textual programming.
Therefore, we should make this possible.
I think it should…
-
Currently there are input pins to the Arduino Uno dedicated to to 'Cycle Start/Resume', 'Feed Hold', and 'Reset/Abort'. We are currently using them attached to a pendant with green, yellow, and red b…
-
I am struggling to get the ATtiny816 to respond as a OneWire device to an ESP32 master. Running the DS18B20 example.
Background info:
The bus and master physically work. I have another real DS18B2…
-
Using some trick such as [this](https://forum.digikey.com/t/simple-way-to-use-usb-type-c-to-get-5v-at-up-to-3a-15w/7016) to simply get 5V 3A from USB-C, and include a simple 5 volt to 3.3 volt regulat…
-
maxgerhardt
2021-02-12 17:27:23.497000
The fork https://github.com/Florin-Popescu/avarice contains some bleeding-edge expansions to avarice regarding programming / debugging microcontrollers with th…
-
### What happened?
I am currently programming a usermod for the BMP680 sensor. I noticed that there is no space between the value and the unit on the info screen. In my opinion, this is a design bu…
-
*Created by: elosha*
These are newer AVR microcontrollers with integrated USB. Well, not so new, as Arduino Leonardo uses an ATmega32U4.
Series includes at least:
- ATmega8U2 – id 0x1E9389
- ATm…