-
Hello,
I have a data transfer problem when I mill a file from the TFT display's SD card.
When I mill with this file from USB everything is OK.
grbl 1.1h
MKS TFT24 display
Firmware MKS-TFT24_C…
-
I'm doing a pocket clear for a PCB I'm milling. When I do the autolevel script the gcode gets changed to add these very large loops in the cutting path. It seems like it might be associated with fil…
-
Hello,
When I run the job the spindle is milling on the edge, How can I make it go through the center? As if it were a single line.
https://imgur.com/a/6vYWtix
Is it possible to do it with bC…
gnurc updated
4 years ago
-
One problem is the setting of the milling depth. If you use different PCB materials you have to run tests.
Solution - you can adjust the milling depth in real time with two buttons + - 0.01 mm.
You …
-
There is a Problem with the milling and prospecting aspect of the Profession icon in the bag when you activate it. It shines like it would for deconstruction, but when I click a mineral or plant nothi…
-
Would be awesome to have the ability to probe a surface and use that map to modify g code for flatness. Use case for me would be pcb milling where small changes in height can drastically effect the qu…
-
Hello,
i would be happy if i could prepare operations for CNC milling directly in OpenSCAD code.
Currently i have to export stl and import it into some software like [PyCAM](http://pycam.sourcefor…
-
-
Infinite loop occurs with a mil effect when deck size is low enough from exile/removal effects. May be related to Graveborn trigger on milled cards.
![image](https://github.com/44madfire/Growing-R…
CSVtl updated
2 months ago
-
Hi Fabian,
I'm a PhD student in Simone Mattei's team at the EMBL Imaging Centre.
Zhengyi and I have made a change to our workflow, and we would like to discuss it with you:
We have commente…