-
Good afternoon, I have a
Axpert Plus Duo 3000-24 from Voltacon
Using Watchpower I can see and monitor my 2nd array (PV2) and can see it is fully working from both Watchpower and the LCD panel.
…
-
I have a SunGrow SG15RT with two strings attached. I would like to see the power generated by each string in HomeAssistant, because a) I am curious :grin: and b) that would allow me to configure the f…
pohly updated
10 months ago
-
### Is your feature request related to a problem? Please describe.
since yesterday Victron was off because of no solar and empty battery (bms turned off)
whole night, MQTT had (retained) H20=1,2 kWh…
-
-
Hi,
Trying to get MPPT info out of my inverter (SG50RS) - but editing the config.yaml to scan at level 2 doesn't seem to work.
if I check Device MPPT log, I see only Level 1 - as below....
QoS: 0…
-
Hi,
I'm also am developing MPPT based on this project.
I've already designed my own PCB incorporating some of the hardware changes You mention in your notes (like low side shunt current sense an…
-
We need to improve the circuit boards for the MPPTs left to us by one of the previous senior design teams.
To start off, I'd like input on why the boards did not function as well as we would have l…
-
I was wondering if this project might be compatible with the DCC50S. It's a DC-DC charge controller with a built in mppt charger. From my understanding it does have an RS485 rj45 port. I would be more…
-
First of All great Project!
Now my question:
Is there any posibility to connect more than One Device with one ESP?
I hav 2 Mppt Charger and would like to connect them to one ESP.
Thanks
-
Mid of last year PowMr released the HHJ60-PRO.
Can it be supported as well?
Refs:
* https://powmr.com/products/mppt-solar-charge-controller-for-parallel-60amp-12v-24v-36v-48v
ss89 updated
3 months ago