-
Hello we're trying to run the code for 5 mpu6050s but there seems to be a problem as the values are random or with offsets.
Attached below is our current code.
I hope you could help us. thank yo…
-
Hello,
I have got a small PCB board which has GPS(BN220) connected and it works fine
```
Second analog to digital sensor is not detected
Foreseen GPS type is Ublox (configured by oXs) :GPS i…
-
Thanks for this cool lib!
It seems that the MPU6050 driver doesn't contain functionalities about DMP(Digital Motion Processor), is there a change to support this?
-
Hey!
I've noticed you're using DMP to get the rotation of the rocket, but I've read that it's pretty unreliable when using it with rockets (as it uses Earth's gravity to fuse sensor data). Have you e…
-
we got sensors (shown in order from left to right):
- DHT22 module (vcc, data, gnd)
- BH1750 + GY-302 module (vcc, gnd, scl, sda, addr)
- HMC5883L + GY-273 module (vcc, gnd, scl, sda, drdy)
- MP…
-
void Init_MPU6050()
{
I2CWrite_MPU6050(I2C_ADDR,PWR_MGMT_1, 0x00); //
I2CWrite_MPU6050(I2C_ADDR,SMPLRT_DIV, 0x00); //1khz
//I2CWrite_MPU6050(I2C_ADDR,SMPLRT_DIV, 0x0…
-
-
When I open Serial monitor it says:
Testing device connections...
MPU6050 connection failed
Send any character to begin DMP programming and demo:
When I then press a random button it outputs:…
-
Hellou,
I'm trying to use the i2cdev library for my mpu6050, but it does not seem to be working. No matter which example from the mpu6050 I take, it's saying always the same: `MPU6050 connection fa…
-
Hello, after the firmware esp cannot connect to mpu6050, I connected everything according to the instructions with all the harness, but in the terminal it displays such a message
```
Sensor 8 Star…