-
how to set 10hz neo m8n ?
-
Does Vizanti have a mobile APK? I saw "The application attempts to replicate RViz's orthographic 2D view as closely as possible with a smartphone friendly interface." mentioned in the text. If so, how…
-
I've a Omnibus F4 Pro (V3). Two months ago I added a Radiolink SE100 (M8N + HMC5983) to my quad. It worked perfectly but after some hours the hardware was dead, I don't know why. I bought another, the…
-
Hello everyone:
I use two Ublox lea-6t to testing RTKLIB on Linux,First,I use one for base station,I use str2str to transfer data from UBX to RTCM3 the command is :
./str2str -in serial://t…
-
### Category
Other
### Hardware
T-Beam
### Firmware Version
2.2.16.1c6acfd
### Description
Occasionally the reported node GPS position looses the negative in front.
ie. -40.0000 becomes 40.00…
-
Hi
Please can you advice where the SPI pins are.
On the PCB it has printed SCK=io5, MOSI=io27, MISO=io19
How do I physically connect to these pins? I can't see any pin outs on the board with th…
-
### Describe the bug
For more than one year I'm running chrony with a Waveshare NEO-M8T GPS/PPS module to have a stratum 1 NTP server. It was running correctly until I let Raspberry PI OS make a big …
-
![20240122_205429](https://github.com/meshtastic/firmware/assets/156138752/bf015ef2-3871-429b-9f3a-ea17016bac0e)
### Category
Hardware Compatibility
### Hardware
T-Beam
### Firmware Ver…
-
### SOC
ESP32
### Lora IC
DL-CC68-S-868
### Product Link
https://www.samsclub.com/p/circuitmess-chatter-stem-project-build-and-code-walkie-talkies/PL980418145
### Description
Requesting reconsi…
-
This the first part of the audit I have done on the command
stream sent to u-blox GNSS receivers by Meshtastic.
Background:
All data was captured by monitoring the GNSS serial port while starti…