-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
### The problem
An log item about the PyOTGW appeared when the connection to my OpenTherm Gateway was somehow disconnected - it's connected to the network by an UTP cable, and no power failure or pow…
-
Does this project support ESP32 boards? I have the DIYLESS adapter and an S2 mini ESP32 board
-
### The problem
Viessmann gas boiler, has sensor.opentherm_dhw_flow_rate, which reporting DHW flow rate in "l/min".
In every start, HA reporting there two warnings:
Logger: homeassistant.compone…
-
All the entities created by the integration are unavailable. I'm not able to reload the integration, due to errors.
Home Assistant 2024.4.4
Ariston NET 0.19.1
My Ariston device is a Velis Evo2, m…
-
### The problem
When working with the home assistant web UI I experience freezing of the UI for a couple of seconds. Inputs from keyboard and mouse not directly shown on the screen, but after a coupl…
-
Great project, thank you!
I’m currently using https://diyless.com/product/opentherm-thermostat2 based on ESP32 S3 and original firmware.
Please advise if I can use your latest release in that se…
-
I have assembled a DIYLESS Thermostat shield with a D1 Mini and installed version 1.3.3
It works with my Domusa Bioclass HM 16 pellet boiler. I have left the master ID with value 0 (default)
Alm…
-
### The problem
Since the update to 2022.7.x I'm not able to connect with my serial connected OTGW.
### What version of Home Assistant Core has the issue?
2022.7.7
### What was the last working ve…
-
### The problem
After replacing a new TOM, the Plugwise Integration can still see the old TOM
Now the old TOM cannot be removed.
The old TOM is not visible in the Plugwise app via the phone>Adam
#…