-
Command: sudo ./build.sh --board=orangepi-5 --project=preinstalled-server --release=noble --kernel=mainline
While building an image with noble, the WiringPi packages are not available and therefore…
-
**确认已寻找过答案**
我已确认在 [Github issue](https://github.com/wzpan/wukong-robot/issues) 页、[常见问题](https://github.com/wzpan/wukong-robot/wiki/troubleshooting)页、[文档](http://wukong.hahack.com) 中都查找过，没有找到类似问题和资…
-
hi,can you help me?thanks
orangepi@orangepi5 [c] (DeepSpeed) 3.6.15 ~/ar master ● git clone https://github.com/mozilla/DeepSpeech.git
Cloning into 'DeepSpeech'...
remote: Enumerating ob…
-
Hope to support the orange pi5.
-
Hello, I need library "libGLES_mali.so" with OpenCL support for Orangepi Zero 3 Android, where can I get one?
Version that is in android image has no openCL, no functions cl*** shown by " nm -D l…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
Hello , I have created a function to send the arm to desired position, the issue is when I am trying to move it it's moving to a point but after that it get stuck and not take the second command. Afte…
-
-
使用了5plus的1.32版本的desktop镜像，刷入sd后 不能正常启动，板子的指示灯是正常的 但是无法连接ssh, hdmi链接也没有反应，使用orangepi官方镜像是正常的
-
I tried to build OpenWRT with package/boot/sunxi-h618.
Here is package Makefile header. Please pay attention it links to this repository commits:
```
╰─$ head -n 15 Makefile
#
# Copyright (C) …