-
### The problem
Since the update to 2022.7.x I'm not able to connect with my serial connected OTGW.
### What version of Home Assistant Core has the issue?
2022.7.7
### What was the last working ve…
-
Dear Ramon,
since 7.4.x athom updated to the new node.js version and the app crashes a few times a day . You should have received some crash reports from my homey on 7.4.1
I think it’s a no cat…
-
I have an OpenTherm Gateway from November 2021 with a wifi module (NodeMCU ??) and I would like to update it with the latest firmware. The process is not completely clear to me and I have some questio…
-
I am unable to change the Max CH setpoint.
My boiler is set to a maximum temperature of 80°C.
OTGW has a (default?) Max CH setpoint of 70°C
I tried setting it to match my boilers temp of max te…
-
When I try to download the new OTGW PIC version (6.5) to the ESP the size shows 0. After I then try to flash this firmware, it still shows version 6.4 as the installed PIC firmware version.
-
https://github.com/rvdbreemen/OTGW-firmware/wiki/How-to-use-it-with-Home-Assistant-or-Domoticz-or-others
Could you add Homey as a supported platform? I posted instructions on how to use with Homey …
-
I'm running Domoticz 2022.2 stable on a Raspberry Pi 3.
I configured with "Setup->Hardware" a "MQTT Auto Discovery Client Gateway with LAN interface"
The Auto Discovery Prefix is "homeassistant" (S…
-
I see multiple times the following error:
Pretty clear whats happening as it expects 00 - 64 at that location, but there are a lot of these errors. Could it be that 64 is not the max value?
Att…
-
I have an OTGW (PIC16F1847) with a WeMos D1 module from Nodo-Shop. The PIC has firmware 6.2 and the WeMos D1 firmware 0.9.5 (the latest).
Earlier I flashed the PIC firmware using a USB cable, but t…
-
In Domoticz I use the Hardware interface "MQTT Auto Discovery Client Gateway with LAN interface" to collect all the boiler sensors from my OTGW.
This works great with one exception.
The Domoticz Err…