-
https://www.pjrc.com/teensy/interrupts.html
need to document attachInterruptVector()
list interrupt names for all boards
should document ARM interrupt priorities and Teensy's suggested uses f…
-
**Describe the bug**
After installing the first version of the Teensyduino Board Manager version for testing the Arduino IDE and Arduino IDE 2, the GUI is showing the address field of the device and…
KurtE updated
11 months ago
-
I need some library for OneWire and DS18B20 which is supported in Arduino.
Here are some information
https://www.pjrc.com/teensy/td_libs_OneWire.html
https://github.com/milesburton/Arduino-T…
-
i've found some code of yours online that has a parity implementation.
is there any chance you could commit to this repo?
re:http://forum.pjrc.com/threads/24199-AltSoftSerial-amp-parity-e-g-begin%289…
-
According to picture that you put on: https://www.pjrc.com/teensy/td_libs_PS2Keyboard.html
The +5V line is on the right. This seems to be wrong, for example see:
[1] https://web.archive.org/web/20…
-
As discussed here: https://forum.pjrc.com/threads/28194-Urgent-problem-with-DmxSimple-library
On the Teensy 3 (and probably 3.1) Only 128 channels are enabled by default regardless of the DmxSimple.m…
natcl updated
7 years ago
-
I'm not sure how to connect V_USB_IN (fused, dioded supply from USB) to the Teensy/MicroMod USB_VIN pin.
Teensy uses USB_VIN for power and I'm not sure that USB communication/programming will work …
-
Teensy 3.1 has specific hardware support for quadrature decoding of up to 2 encoders. Should provide even better performance then the interrupt driven mode.
http://forum.pjrc.com/threads/26803-Hardw…
-
Tool should have the ability to switch between different power modes based on battery charge level.
Power modes should have defined services and timings.
-
Kris, I was hoping you would respond to this teensy forum
https://forum.pjrc.com/threads/33328-Prop-Shield-Beta-Test?p=101499&viewfull=1#post101499
Your prop-shield sketch does fusion updates even i…