-
Hello Achim,
Flashing main.bin using OTA works fine, and the device works as expected. Excellent!
But OTA flashing needs quite some time, and does not work without an internet connection. So I w…
-
![Zrzut ekranu 2020-02-10 o 15 08 19](https://user-images.githubusercontent.com/6240915/74156736-4099c700-4c17-11ea-8b9d-779bfb9d21a0.jpg)
-
It would be nice if there would be a build instruction for this project.
I saw that there is a reference in [buildconfig.mk](https://github.com/zmoteio/zmote-firmware/blob/master/buildconfig.mk) to a …
-
I am getting reset while closing a socket connection. I am using the tcp_non_blocking example. The reset cause is rst cause:2, boot mode:(3,6), triggered from FreeRTOS/Source/queue.c . I am able to co…
-
Hi @HomeKidd
I am using the new USB-C PCB and got a similar issue as #16 with both 2.10 and 2.11.
1. The display never works like described in #16. I am able to change the display type. But ser…
-
Hello Martin,
I have only enabled the ENC28J60 in the user_config.h and get the following error:
`.text' will not fit in region `iram1_0_seg'
Do you know this error? Can you help me?
Do you …
-
Hi,
since I added WPA2 credentials (the eduroam use case as described in the manual...)
my ESP is stuck in a boot loop, the ouput below is produced in 3-5sec.
Any idea what is going wrong here?…
-
**Thanks for the recent batch of work, I think a lot of these changes are very positive.**
I wanted to give some feedback to help steer the work before the next release.
First, I think the addit…
-
Hi,
I had worked a lot you your great code (but also I've made some mess in...), and I was looking to what seem be a miscalculation in the checksum. Actually I have a mismatch between the checksum ca…
-
Recently I updated to latest esp-open-rtos (I was working with a version from july 2016), and after adapting my code to the changes, I found that my application crashes. Just after accepting a TCP con…