-
Hi, I've rewired this a few times and am still just getting constant static in the subghz monitor screen. Has anybody else managed to fix this or could I just have a faulty CC1101 module?
![172692090…
-
Press Enter to exit
Card Type [Master,Super,User]: q
First Name [Max 48 Char]: w
Last Name [Max 48 Char]:e
Employee ID [Max 16 Char]:q
Department Number [Max 16 Char]:q
Title [Max 16 Char]: q
W…
-
for my in-house product of RFID card attendance system in the office. I received a data from my server.
I just want to do when a valid card or employee scan the RFID card.
I want to put a "welcome…
-
Hi,
i use your code for read some RFID 125Khz card with EPS8266 + RDM6300, it's working (thanks a lot) but i have some RFID 125khz card blank ( with modifiable UID - sector 0 ).
Can i use RDM6300 …
-
I am using this library in the Siemens RFID reader example application running on an S7-1500 OpenController.
When the RFID card is detected in range or leaves range I write data to PLC. This works fi…
-
When I place a tag it will read twice. The first read is correct, the second is not.
This one is the blue chip
Code: 1016577, Facility: 15, Card: 33537
Code: -1928363263, Facility: -29425, Card: 33…
-
Hi,
i am using version 1.02 with a rc522 reader.
I hide an esp-rfid reader in the charger housing of my vaccum robot one reader on each floor to identify on which floor the robot is docked for l…
-
Hi , i wanted to make my wifibo system smaller and have a m5stick, and m5 rfid reader, which is a mrc522 connected to spi.
the iic address is 0x28
the rfid unit is the same one as here : https:…
-
The idea is to use a Raspberry Pi (_or Arduino_) to power the RFID Reader for the Door(s).
The Raspberry Pi Zero W has the following _advantages_:
+ Cheaper (_**£9.16** per board_) ... see screens…
-
For our data weight scale, there is another rule that user can only weight the item without adding the scenario card, but once there is no item on the plate, even if the user puts the corresponding sc…