-
This may be related to #294 . I am trying to use gpredict for greencube. To define both the uplink and downlink frequencies, I added the following section to `~/.config/Gpredict/trsp/53106.trsp`:
```…
-
**Describe the bug**
There is a potential for out-of-bounds (OOB) access to occur during the referencing of `rx_buf` in the LoRaWAN service, such as in the `frag_transport_package_callback`.
The…
-
**Describe the bug**
When using a controlled `rx.slider()`, I want the `on_change` handler to be de-bounced, to have both:
1. a responsive UI
2. protect the backend from spam
I have tried usin…
-
All of my sensors are setup in home assistant as MQTT sensors all listening to the same topic, so it would be more useful to receive MQTT on a subtopic like wican/xxxxxxxxxxxx/can/rx/PID. Is it possi…
-
Apollo3 Blue MCU is not able to communicate with SX1262 transceiver over spi. For test purposes, I used sample/subsys/lorawan/class_a example project.
The code is running on RAK11720 module from RA…
-
This is needed to allow logarithmic buffer indexing time as opposed to linear that is available currently. LibUDPard traverses the fragment tree once, during the transfer finalization, to build the li…
-
### The problem
Attempting to determine why parameters like div_ratio: and capacitance: have no apparent effect while tuning the as3935. Finally determined that reading the registers for these values…
-
Hello,
since a few days, I have a new CS-Z25ZKEW. This is a model with an empty plug and the wlan somewhere inside.
So, I thought, I can connect like this: [(https://github.com/DomiStyle/esphome-pan…
-
I want to communicate between the Prusa Firmware and an external Arduino via the TX/RX pins on the J19 connector of the Einsy Rambo board on my Prusa i3 MK3.
The firmware has a MarlinSerial object …
-
We have rx.LocalStorage() but not rx.SessionStorage().
Store data such as tokens in Client Storage in a secure way.