-
```yaml
id: 3316
title: 'RVD#3316: No authentication in MAVLink protocol'
type: vulnerability
description: The Micro Air Vehicle Link (MAVLink) protocol presents no authentication
mechanism on…
-
Hello,
I use the Hott protocol with a Graupner GR-24 Pro receiver.
With a true Graupner handset, it's possible to define the channel 8 as SUMD signal.
`SUMD (Signal cumulé numérique) au canal 6 (…
-
## Current Behavior
CRSF-Packets with extended-destination `0xc8` are forwarded from handset to receiver-out. Other extended destinations are not forwarded.
There could be other devices connect…
-
Is there a plan to add support for the long range systems (TBS CrossFire/FrSky R9)?
By taking apart the R9M and the R9 I own, I found they are based on the SX1276 LoRa chip from Semtech (https://www.…
-
i notice the battery firmware is not encrypted. i wonder what could be done to the battery controller so aftermarket batteries could be connected
-
Outside of the !["Redhat Atomic" world](https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/using_containerized_identity_management_services/overview-of-the-containerized-ipa…
-
hi @RomanLut
==>disable use_sport in tx_config.h
// #define USE_SPORT
==> debug serial
void getChannelValues( HXSBUSDecoder* sbusDecoder, HXChannels* channelValues )
{
bool failsafe = sb…
-
Hey @AlessioMorale , thank you for this CRSF parser, it helped me a lot already, please lmk if there is a way I can donate you for this effort?
I'm looking for a solution to aggregate several physi…
-
pulseview / sigrock-pico : waouh, great job !
i noticed one bug : when i select digital channels not in natural order (D2/D3/D4/...), the capture fails.
for example when i select only one channe…
-
@Carbon225
I am new to this , might feel like a silly question :).
This is what i understood, connect the sbus tx to the Rasbeery Pi 4 GPIO14 .
Is there any need to use inverter in between the ab…