-
Hi,
I've just written my [first sensor mod](https://mods.factorio.com/mods/aubergine18/evo_elev_temp) ([github](https://github.com/aubergine10/evo_elev_temp)) for EvoGUI and in the on-tick handler I …
-
First boot of a device after clean install of the 3.1.1 firmware. This was while I was connecting to the hotspot on my phone and configuring my Wifi information.
Note the `request handler not foun…
-
### Problem description
The device is discovered, but with no sensors. I have all connected fine, I can see total and instantaneous power in Tuya app. Where to start?
### Solution description
…
-
**Is your feature request related to a problem? Please describe.**
No.
**Describe the solution you'd like**
Smartthings presence sensor does not expose any entities to homeassistant.
Model: Smar…
-
## Expected Behavior
When setting a value between 0 and 100, I expect the roller shutter to be set to this pre-calibrated position.
## Current Behavior
Randomly (no every time) values are mapped …
-
**Is your enhancement proposal related to a problem? Please describe.**
I'm using lis2ds12/lis2dw12 with nRF9160 DK. I add the sensor in overlay file in the device tree:
```
&spi3 {
compatibl…
-
sensor_ctrl's alerts 5 and 10 are known to be flaky (see #20678 and #20798) on Earlgrey-ES.
I see two options for dealing with this:
In each test/program for which these alerts have an impact,…
-
I have a couple of onewire iButton keys (DS2401). They are used to set an operational mode for OH (e.g. vacation mode)
They are configured as onewire basic things
e.g.
```
Bridge onewire:owserver…
-
### What happened?
I've 14 IKEA Parasoll sensors connected to my zigbee network.
The sensors are going offline in Zigbee2MQTT after they should have checked in for the availability check.
My …
-
Advanced ESP device settings:
- [ ] interval mellem readings for temp/humidity
- [ ] interval mellem readings for particles
(når en sensor er tændt kan vi ligeså godt få begge readings)
- [ ] Updat…