-
I'm trying to test this - and the SHT85 library
I installed this library, with dependencies but examples/SHT31_demo/SHT31_demo.ino fails to compile
I'm using esp32->LOLIN Wemos D1 mini, but thi…
-
I have installed all libraries and all required to get my M5Paper detected and loaded on Arduino. I am able to upload other sketches to my device, except this one. Attached to this post is a txt file …
-
Hello,
is it possible to do a partial display update and not always do the complete display update?
It is really annoying when the full display is flashing black and white just to update a tempera…
-
Has anyone experience the same issue?
My MQTT input stop receiving data after a few days.
I restart the input and it works normally.
My Input MQTT Client ID is unique. And the MQTT server is wo…
-
I built a BuzzBoard but it doesn't seem to manage sending the audio records. This is the serial monitor output:
`Microsoft Windows [Versione 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tutti…
-
Hi,
can you build a firmware for a modified ZTH01?
I have removed the so16 and would wire the pins accordingly to the attached picture.
SCL (AHT30) - C3
SDA (AHT30) - C2
VDD (AHT30) - D2
Butto…
-
This references work done for #86 . I've been able to make this work in practice using an ESP8266 with an SHT30 temp sensor, pinging the heatpump approx every minute to update the temperature.
In d…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
Since the update my AG Pro (sht30) keeps resetting every ~2 minutes with the ESPHome logs being:
```
...
[23:12:17][D][pmsx003:234]: Got PM1.0 Concentration: 8 µg/m^3, PM2.5 Concentration …
-
This line in the /boot/config.yxy on my rpi3, gives the rainbow screen and the RPI3 does not boot.
dtoverlay=i2c-gpio,bus=3,i2c_gpio_delay_us=1,i2c_gpio_sda=23,i2c_gpio_scl=24