-
Please look at line 138 at si5351.c:
if(pll_calc == 0)
Why does it evaluate function pointer here? The result will always be false.
EU1KY updated
9 years ago
-
si5351_set_pll() does not free allocated buffer.
BTW, why malloc's are used? Create 30-byte buffer on the stack and avoid all problems.
EU1KY updated
9 years ago
-
Problem: if i try to use the debug system, the file size increases over a limit of 64 kb. Is there any chance to get it lower? How do you @mikaelnousiainen debug this?
**Details**:
If i try to …
-
Frequent device status (SI5351 Register 0) readings by Test06-Si5351 occasionally report the value, 0x69. rather than the expected 0x00. Notes:
* 0x69 == 0110 1001 in which the .11..... bits are …
-
Hi!
Can you please share how to connect the gps and the sil5351 to the Arduino Uno r3?
Please.... a wiring diagram would be very great
-
Hi! I am testing the library with the SI5351A-B-GM version of the chip. It's the A version with 8 clock outs.
I am using a 25Mhz crystal, specifically this one:
https://www.mouser.mx/ProductDeta…
-
Hello, I am looking to make a config for 144mhz wspr but when i enter the frequency in the config generator I always have error
pll.c should be in range [1 ... 1048575]
How does one enter the…
-
I'm a noob to Arduino but the need for frequency control using the Si5351 has lit a fire under me! So first, thank you for your efforts! I really like the v2 updated library which I find much mor…
w9ran updated
4 years ago
-
I noticed the comment on PLL reset in your README.md and thought of an email by Hans G0UPL who uses the SI5351 extensively in several projects. His email goes into depth on the topic:
https://group…
-
Trying to compile after downloading all the required libraries (using Arduino UNO as target board) I get the following error:
-> 's_meter10x15' was not declared in this scope
The s_meter_font.h fi…