issues
search
conr2286
/
PocketFT8Xcvr
Pocket FT8 Revisited
4
stars
1
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Maidenhead locator is not working
#34
conr2286
opened
3 hours ago
0
Add GPS support to obtain location and UTC date/time
#33
conr2286
opened
1 day ago
0
Enhance SI5351.cpp to use a member variable for the I2C bus
#32
conr2286
opened
3 days ago
0
V2 FW/HW receiver finds no candidates
#31
conr2286
closed
1 day ago
3
V2.00 Board not finding SI4735
#30
conr2286
closed
1 week ago
1
The log file should follow the ADIF format
#29
conr2286
opened
1 month ago
0
Issue #23: Implement changes to allow SI5351 and MCP342X to move to Wire2 bus
#28
conr2286
closed
1 month ago
0
Excessive resistive touchpad bounce
#27
conr2286
opened
1 month ago
4
During modulation, the V1.10 transmitter has an intermittent -30 dB second harmonic
#26
conr2286
opened
1 month ago
2
Traffic Manager doesn't enable/disable receiver for Tu (Tune) off/on
#25
conr2286
closed
1 month ago
1
Cleanup around SI4735, etc. for noise reduction
#24
conr2286
closed
1 month ago
0
The Pocket FT8 Transceiver seemingly doesn't display all the received messages
#23
conr2286
closed
1 day ago
6
Receiver is not decoding FT8 traffic
#22
conr2286
closed
1 month ago
1
Enhancement: Implement a config file on SD
#21
conr2286
closed
1 month ago
1
REPLACED the two 2N7000s with a dual mosfet, 2N7002DW
#20
conr2286
closed
2 months ago
0
Implement FW support for PIN_RCV
#19
conr2286
closed
2 months ago
0
74act244 power amplifier
#18
conr2286
closed
2 months ago
0
Revise GPS Connector
#17
conr2286
closed
2 months ago
0
Moved battery to back (solder) side of board
#16
conr2286
closed
2 months ago
0
V1.01 PCB is using the Teensy 3.X rather than 4.X audio input network on pin A2
#15
conr2286
closed
1 month ago
1
CQ button ignored until received traffic appears
#14
conr2286
closed
1 month ago
5
Resolved PocketFT8Xcvr crashes and reboots following first calls to p…
#13
conr2286
closed
2 months ago
0
PocketFT8Xcvr crashes and reboots following first calls to process_FT8_FFT(), extract_power(), and arm_rfft_q15()
#12
conr2286
closed
2 months ago
2
Move from 17M to 40M
#11
conr2286
closed
2 months ago
0
Resolve Call to receive_sequence() hangs In PocketFT8XcvrFW. No furth…
#10
conr2286
closed
2 months ago
0
Call to receive_sequence() hangs In PocketFT8XcvrFW
#9
conr2286
closed
2 months ago
0
Touchpad needs coordination over full screen
#8
conr2286
closed
2 months ago
1
Test06-Si5351 Occasionally reports LOL_B, LOL_A, etc
#7
conr2286
closed
2 months ago
1
Test05-Touchpad X,Y coordinate investigation
#6
conr2286
closed
3 months ago
0
Investigate whether Test05-Touchpad reports the expected X,Y coordinates as they are suspicious
#5
conr2286
closed
3 months ago
0
MCP3422A1T-E/SN I2C address is 0x69, not 0x68
#4
conr2286
closed
3 months ago
1
XMIT LED is always "on" and cannot be turned-off
#3
conr2286
closed
3 months ago
2
PCB Patch, test and FW changes to repair 1-v101-sck-and-ptt-reversed
#2
conr2286
closed
3 months ago
1
V1.01 SCK and PTT reversed on Teensy digital pins 14 and 13
#1
conr2286
closed
3 months ago
0