-
Downloaded latest OrcaSlicer v1.9.0. I noticed this release was supposed to include your latest profiles, which is great. But, the start/end gcode contain multiple long purges and a long retraction at…
-
I wanna print via OctoPrint with two filaments and slice with Orca. So I downloaded the latest config here and replaced as mentioned.
I wonder why in the whole gcode is no M605, even no
```
;M605 S…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.0.0-beta
### Operating System (OS)
Linux
### OS Version
Ubuntu 22.04
### Add…
-
### OrcaSlicer Version
1.8
### OS version
Windows 11
### Additional system information
_No response_
### Printer
Snapmaker J1
### How to reproduce
Add a 2nd filament to a project
Add a spher…
-
### OrcaSlicer Version
1.8.0
### OS version
Windows 11
### Additional system information
none
### Printer
Snapmaker J1
### How to reproduce
Add a 2nd filament to a project
Slice a model and …
-
Printed under general conditions with right nozzle only.
When I set up as shown in the figure, the first layer prints correctly, but from the second layer the nozzle temperature is set to 0 and prin…
-
How to reproduce (in PrusaSlicer ; gcode attached, J1 Firmware 2.6.2):
1. create simple shape on the left side of the plate
2. select physical printer with IDEXCopy or IDEXDuplicate in the name
3. …
-
### Description of the bug
On the organic supports it generates very strange from my other printers. Just wanted to send this out to see if this was normal or a known issue.
![Screenshot 2024-01-02…
-
### OrcaSlicer Version
1.8.0
### OS version
Windows 11
### Additional system information
_No response_
### Printer
Snapmaker J1
### How to reproduce
Start a 2 extruder print…
-
### Is your feature request related to a problem? Please describe.
Marlin has original input shaping solution and Ulendo.io fixed-time motion in progress.
Original input shaping supports currently o…