-
when I run this application, i get this error
if i Disable from the config file the last (4th) AirSpy, then it starts up fine..
Jun 26 23:07:42 SDRPC001 systemd[1]: Started SDR AM/NFM demodulat…
-
Hello,
I'm trying to get SigDigger up and going and have built everything from source on an Ubuntu 20.04 VM. Everything seems to be running well until I start running after loading the UHD profile. …
-
Commit 0aae6a5 is the last with SoapySDR able to activate stream
After this commit linhpsdr, on Ubuntu 18.04 - 64 bit, exit with error:
soapy_protocol_init
soapy_protocol: receive_thread: SoapySD…
-
SoapySDR assumes that gains are additive in dB. When `Device::setGain` is called *without* a name, it automatically distributes the requested gain between all available gain stages:
https://github.co…
-
First off, thanks for the work on this project, it should perfectly fit the bill for what I'm attempting. :) I'm looking for SoapyRemote to cross-compile for armv7,neon and I've gotten most of the w…
-
## Issue Description ##
Hi, I know the support for the analog devices is limited due timestamp not implemented with analog devices drivers but from other issue I know there is some test than can be …
-
SoapSDR is a vendor agnostic software defined radio library used for direct control of the radio. Since Soapy's use is widespread in the SDR community, cuSignal should have better integration and docu…
-
https://github.com/ccsh23/SoapySDR_TXRX_Burst_Tester/blob/910a53b187eb822ccdb773a8c9e13184a1f787ce/SoapySDR_TXRX_Burst_Tester/classes/sdr/SDR_Device_Wrapper.cpp#L388
Also, you can simplify this swi…
-
**Describe the bug**
if use SoapyUHD for [openwebrx](https://github.com/jketterl/openwebrx). works fine for few minutes, than
data stream stops. i opened a [issue at openwebrx](https://github.com/jk…
-
using rtl_airband or CubicSDR mostly when i startup my Airspy R2 i see a really poor noise floor, have to stop /start a few times to get it where it should be.
i don't see this on my SDRPlay rsp2 or …