-
Hello all
Try to detect or give the power factor for power calculations and calibrations.
Tks
-
Does this plugin work with an ethernet connected inverter?
I use the SolarLog 100e and it's a rather old inverter.
-
hallo, after installing the script the vrm readings for Grid power is showing the load power not the grid power and the load power is shown as zero always
![Screenshot 2024-06-27 143539](https://gi…
-
### The problem
I got an unexpected error
![grafik](https://github.com/user-attachments/assets/38037592-ed77-494c-8291-3913427b3a64)
while trying to connect to my Kostal Plenticore 10 G2
### …
-
Interface from homeassistant:
- Latitude
- Longitude
- Declination (0 = Horizontal, 90 = Vertical)
- Azimuth (360 degrees, 0 = North, 90 = East, 180 = South, 270 = West)
- Total Watt peak power o…
-
# What happened?
My Inverter MIC2000 is running. The green leaf is lighted and i see the power etc. in de Display. But there are no values on the GroStick. every value is 0 and the status is 0 (Waiti…
-
### Describe your feature request
Unfortunately I've not found in Huawei Solar Inverter Modbus Interface Definitions ...
but really helpful for energy management optimazations.
Seen in FusionSo…
-
My inverters still don't show up in the energy tab in Home Assistant
Logfile:
2024-06-23 09:40:55.728 WARNING (MainThread) [homeassistant.components.sensor] Entity sensor.pv_last_365_days_producti…
-
A user reports running a model chain with no spectral model specified and with CEC module parameters. The logic for `ModelChain.infer_spectral_model` returns `first_solar_spectral_loss`, which expects…
-
I'd like to be able to use my RTL-SDR dongle to decode 868Mhz messages from my Hoymiles HMS solar inverter.
There are two implementations for codecs using the CMT2300A chip included in these two pr…