-
In Schematic file I noticed, that display's WR pin has't any connections on board and display driver uses the 9-bit SPI for transfering data between display and MCU.
In ST7789V datasheet I've found…
-
Reading the docs it looks like the ST7789V display for this watch should work, I've tested this based on the PIN out provided from the [source](https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library/bl…
-
System: Custom rp2040 board with ST7789V display, TFT_eSPI library (PIO SPI) and arduino-pico core.
With pngDEC 1.0.0 and 1.0.1 everything works nicely. When using pngDEC 1.0.2 system sometimes jam…
-
https://github.com/rm-hull/OPi.GPIO
-
I tried to make the build for the LCD display, after setting up RaspberryPi OS. However, after the make command I get the following error:
> make -C /lib/modules/`uname -r`/build M=/home/pi/pibox-o…
-
ESP32S3 ESP-IDF stable version 4.4 has been released, most features are available, SD card is not supported.
ESP32S3 more powerful than the old ESP32 , built-in PSRAM and FLASH takes up less PCB spac…
-
**Describe the problem you have/What new integration you would like**
So I have a 4.0" TFT Touch Display based on the ST7796 Driver which supports touch and runs on the SPI bus.
Is there any w…
-
The [STM32F412G_DISCO](https://github.com/zephyrproject-rtos/zephyr/blob/main/boards/arm/stm32f412g_disco/doc/index.rst) board is supported by Zephyr, but the LCD driver seems to be missing.
![stm3…
-
Did some one get the xp2046 to work with an ESP32-S3
I tried
`
#define XPT2046_IRQ 1 // T_IRQ
#define XPT2046_MOSI 42 // T_DIN
#define XPT2046_MISO 2 // T_OUT
#define XPT2046_CS 41 // T_…
-
When i run the sudo ./fbcp-ili9341 command the screen gets a bit brighter but remains white. And i get a Bus Error.
```
pi@raspZero:~/fbcp-ili9341/build $ sudo ./fbcp-ili9341
bcm_host_get_periphe…