-
Hi!
It seems like currently there is no way to read flash from the device (this feature is not available even in their own tool).
However, I really need this feature for one of the projects I'm worki…
-
Hello.
Experiencing here tons of problems trying to flash STC15F204EAs... (I've got 3 of them, no one works)
Description:
- Tried STCGAL with -l 2400 -b 2400 (most if not all other -l and -b combos…
-
According to its [datasheet](https://www.stcmcudata.com/STC8F-DATASHEET/STC8G-EN.pdf), microcontrollers part of the STC8G family have an integrated high-precision internal IRC oscillator, which can be…
-
Is it possible to flash EEPROM memory only?
"stcgal" command is designed to have CODE and EEPROM file as parameters at command line, CODE file is the first parameter. I would like to have posibilit…
-
Hello, thanks for your work on this - I have been using this sensor for a while so I am excited to try a new firmware on it...but...
When I try to flash the prebuilt binary the flash tool (STCGAL) …
-
From here
* https://github.com/avrdudes/avrdude/pull/1523#issuecomment-1784217877
@MCUdude found an issue with AVR EB support.
```
$ ./avrdude -cpkobn_updi -pavr16eb32 -qq -t
avrdude> read fuse…
mcuee updated
10 months ago
-
执行:
```
./stcgal.py -P auto ../c51demo/MAIN.hex
```
提示错误:
```
Waiting for MCU, please cycle power: done
Protocol detected: stc89
Protocol error: packet checksum mismatch
Disconnected!
```
…
-
Hello!
Very interesting Project!
A few comments from my side to the Sensors:
I have running 36 sensors. At every Window/Door one of them.
- The Battery running time is about 1 year for the Sen…
-
Hello Everyone,
I am new here, so please advise if this is the wrong place to ask the following question.
I am trying to program an AT89S52 chip.
I am using avrdude 6.3 and an ebay programmer w…
-
Hi, i had a bad adventure that might be helpful for the future.
I have the Bafang BBS02B 500W 36V.
I have these versions of the MCU : STC15F2K60S2 F/W version: 7.2.5S
So, as wrote on the inst…